Vermeer SC252 Stump Cutter

Vermeer SC252 Stump GrinderSC252

Eliminates the guesswork. This self-propelled unit has an optional AutoSweep system that increases productivity while reducing drive-train wear and tear. With a 27 HP (20 kw) Kohler engine, the SC252 has what it takes to put the tough stumps to rest. A slim 35" (89 cm) width allows easy maneuvering of the unit. Optional dual drive wheels (shown) improve traction and stability.

Features & Benefits

Feature: Compact 35" Wide Unit
Benefit: This allows operators to get through gates or into tight spaces in order to cut the stump.
Feature: Self-Propelled
Benefit: This makes the unit easy to operate and the controls for speed and steering are centrally located on the control station.
Feature: 27 HP Kohler Engine
Benefit: 8% increase in HP over 2004 model SC252's.
Feature: Great Rental Yard Unit
Benefit: Small in size but gives you the capability to do most any job.
Feature: Hydraulic Front Steer
Benefit: The Vermeer SC252 Hydraulic steer option is "Built to Last" with special attention to such details as Hardened Bushings and Pins at all pivot points on this option. This is important as our competitor simply uses threaded bolts and no bushings on their design which could have a negative affect on the long term reliability and maintenance costs of their machine. In addition our hydraulic steering configuration is designed to allow full forward or reverse propel while using the steering cylinder without a propel “stall” mode when the steering cylinder bottoms out. Again, this is a competitive advantage over the Rayco 1625A hydraulic steering system.
Feature: Cutter Wheel Brake
Benefit: The Cutter wheel will stop within a few seconds once the brake is activated.

Specifications

General
Length  115 " 292 cm
Width  35 " 89 cm
Weight with Gas Engine (2WD)  1040 lbs 471.7 kg
Main Frame
Frame Construction  Frame: 3" x 3" x 3/16" Boom: 4" x 4" x 3/16"
Hitch  Adaptor for TLR-22, 25 Optional pin hitch, safety chains and jack
Tires  5.70-8, optional duals
Chip Contanment  7.7 cu ft .22 cu m
Cutter Wheel/Drive
Wheel Diameter w/o Teeth  16 " 41 cm
Wheel Thickness  .5 " 1 cm
Wheel Swing Arc  40 " 102 cm
Wheel Cut Above Ground  25 " 64 cm
Wheel Cut Below Ground  13 " 33 cm
Tooth Quantity  16
Cutter wheel drivetrain  Belt driven, electric clutch
Capacities
Fuel Tank  6 gal 22.71 L
Hydraulic System
Oil Tank Capacity  2.8 gal 10.6 L
Engine
Make and Model  Kohler Command
Horsepower  27 hp 20.1 kw
Type of Fuel  gas
Options
Available Options  Autosweep, duals, trailer package