Vermeer BC1000XL Wood Chipper

Vermeer BC1000XLBC1000XL

Maximum power from a 12" (30 cm) chipper. The BC1000XL combines an impressive 85 HP (63 kw) engine, a large 12" x 17" (30 cm x 43 cm) feed opening, a clutchless PTO and a rubber-torsion suspension for maximum performance in the field. The BC1000XL also offers a noise-reducing design and has an optional sound-abatement package available that makes it one of the quietest and most productive chippers in the field.

Features & Benefits

Feature: High-Power Engine
Benefit: This Cummins turbo charged diesel engine is strong, reliable and well supported in the field. Features powerful performance that enhances chipping productivity.
Feature: Clutchless PTO
Benefit: This design combines the Throttle and Clutch enagement mechanism to prevent the drum from being engaged at high RPM. Allows the cutter to be engaged without sliding the engine or using a traditional slip clutch or idler pulley. Practically eliminates the possibility of expensive drive-train repairs caused by abuse. Applies no side-load to the engine, leading to less stress on the crankshaft and bearings. Allows easy belt changes without tools once under the access door.
Feature: Large Feed Opening
Benefit: Is one of the largest in its class - 12" (30cm) tall and 17" (43cm) wide. Leads to higher productivity by minimizing the amount of time spent trimming material.
Feature: SmartFeed
Benefit: This patented feed sensing control system offers all of the same advantages as the SmartFeed system on the BC1800XL. This feed sensing control system increases productivity. Customers can choose between 3 RPM "droop" settings to make the BC1000XL fit their specific application. A simple "plug in" cartridge is installed to change from one RPM setting to another.
Feature: Bottom Feed Stop Bar
Benefit: The BC1000XL is also equipped with RESET/HOLD to RUN buttons on each side of the infeed housing to make the reset process simple and quick if the bar is tripped. These RESET buttons can also be depressed for up to 30 seconds to over ride the bottom bar temporarily during difficult feeding conditions.


Specifications

General
Weight  4610 lbs 2091.1 kg
Length  170 " 432 cm
Width  66.5 " 169 cm
Height  97 " 246 cm
Engine
Make and Model  Cummins B3.3 (TeirII Compliant) Turbo Charged
Horsepower  85 hp 63.4 kw
Type of Fuel  diesel
No. of Cylinders  4
Cooling Medium  liquid 12 quarts
Capacities
Fuel Tank  25 gal 94.64 L
Hydraulic Tank  7 gal 26.5 L
Chassis
Frame Description  Z section .25" x 5"h x 3.75"w
Tires  ST225/75R15 LRD-Standard LT245/75R16 LRE Optional
Axle/Suspension  5200 Rubber Torsional
Hitch  Pin, Pintle-2 3/8" ID, 2" and 2 5/16" Ball
Cutting System
Disc/Drum Speed  2000 rpm
Drum Size O.D.  21 " 53 cm
Drum Width  20 " 51 cm
Knives  2, 4.5" x 9" x 5/8"
Bedknife  4-edge 1" x 3.5" x 17.25"
Feed System
Chipping Capacity  12 " 30 cm
Infeed Opening Height  12 " 30 cm
Infeed Opening Width  17 " 43 cm
Feed Table Length  69.5 " 177 cm
Feed Table Height  30 " 76 cm
Roller Style  1, horizontal 20" dia
Discharge System
Discharge Height  97 " 246 cm
Degree of Rotation  270 deg