Salsco 813XT Series Wood Chipper

Salsco 813 Brush Chipper813XT Brush Chipper

13" x 18" Chipper
Model 813XT

Performance & Durability!
FEEDING & CHIPPING Beyond All Others!

Standard Features

  • Bottom Feed Roll
  • Live Hydraulics
  • Feed Sensing with Auto Reverse
  • Hydraulic Feed Roll Lift with Down Pressure
  • 9,000 lb. Heavy Duty Jack
  • Safety Light Package
  • Adjustable Height Exhaust Chute
  • 360º Hand Crank Exhaust Chute
  • Easy Adjust Exhaust Flap
  • 13" High x 18" Wide Infeed Opening

Salsco 813 Wood Chipper

Standard - Double Feed Roll  





Salsco 813 Wood ChipperOptional - Hydraulic Winch, 9,000lb Horizontal Pull







Towing Hitch 2-5/16" ball, or 3" pintle, adjustable for height.
Tongue 3" x 6" x 1/4" wall, rectangular steel tube.  Bolt on tongue bracket is 1/2" steel plate with 1/4" gussets welded for extra support.
Tongue Jack 9,000 lb. capacity, heavy duty jack.
Trailer 2" x 6" rectangular tubing with support gussets and continuous welds for strength.
Fenders Extra heavy duty 1/4" diamond plate fenders with safety light guards.
Lights License plate, stop, directional and safety, 7 - prong adaptor.  D.O.T. approved.  Safety Light Package over infeed Chute.
Safety Chains Two (2) 3/8" links x 30" length with slip hooks.  Meets SAE safety standards.
Axle 7,000 lb Torflex Axle, features an independent suspension, cushioned with rubber, providing a smooth, quiet ride with no transfer of road shock from one wheel to the other.  Electric Brakes with break-away switch.
Tire & Wheel Assemblies 12.0 x 16.5, 10 ply.
Paint Orange, polyester powder coated paint offers excellent weatherability and protection against ultra violet discoloration.
Fuel Tank 25 Gal. 19-1/4" x 12" x 24", with lockable filler cap, sight gauge, and shock mounted with rubber cushions on all mounting brackets.
Hydraulic Tank Triangular.  16-3/4 gal. 24" high, 18" sides (1,881 sq. in.).  Lockable filler cap with sight gauge and shock mounted with rubber cushions on all mounting brackets.
Infeed Chute Extra wide profile, 1/4" thick steel plate sides, 57" x 33".  45" from edge of standard infeed tray to center of feed roller for safety.  Control bar positioned at top and side of infeed tray to control movement of material - forward/neutral/reverse.
Chipper Disc 2" thick x 40" diameter disc, machined and balanced, mounted on a 4-1/2" diameter steel hub with 6 exhaust blades. (Approximately 700 lbs.)
Chipper Bearings  3" - 4 bolt flange bearing.  Self centering, heavy duty cast iron type.
Chipper Blades Six (6) 7-1/4" x 4" x 1/2", double sided, reversible, bolted, and set into 2 knife pockets machined into disc.
Infeed Opening 13" x 18" opening at the infeed roll.
Bed Knives Two (2) Horizontal, 1" thick x 6-1/4" x 15-3/8" and 1-Vertical, 1" thick x 7-5/8" x 12-15/16".  Both knives are reversible and adjustable.
Speed Sensing Speed sensing with auto reverse
Hydraulic Lift Cylinders 2-Feed roll lift cylinders with down pressure.
Live Hydraulics Live hydraulics with remote mount pump.
Hydraulic Feed System Heavy duty 800 lb., weighted box type feed system.  Feed rate, 0 - 130' per minute.  Hydraulic hoses - 2,500 lbs., P.S.I. working, 10,000 lbs. P.S.I. burst, including hydraulic pump, control valve with relief valve, hydraulic motors and 16-3/4 gal. hydraulic oil reservoir.  Live hydraulics, speed sensing and hydraulic feed roll lift.
Hydraulic Feed Rolls 2 - Upper, 21" Diameter x 18" Long.  Lower, 14-3/4" Diameter x 17-1/4" Long.  Both with replaceable knife blades, or teeth, and scraper bars to prevent wrapping.
Battery  12 V automotive style, 900 cold cranks with lockable box.
Tool Box  Lockable tool box.  7"W x 16-3/4" L x 6" H.
Discharge Height adjustable, 360º hand crank, swivel chute with easy adjust chip deflector.  No tools required for adjustment.  (270º stop available, if required)
Overall Dimensions Total length, 171", Width - 80-1/2", Height to top of discharge - 93", Weight - 7,500 lbs. (approximately)