Salsco 810 Wood Chipper

Salsco 810 Brush Chipper

10" Capacity, PTO, Wood Chipper
Model 810

Only 35 HP Minimum Required!

 

 

 

 

 

 

 

Four 1/2" double sided chip blades, heavy duty 2" thick disc, with extra wide blade openings. Easy chip blade access and virtually no clogging.  Durable and simple to maintain.

 

 

 

 

 

 

 

 

 

Salsco 824 ChipperExtra wide 18" infeed opening means less pruning, more efficient processing of material.  No Hydraulics are required from the tractor.

 

 

 

 

 

 

Specifications

Trailer 2"x4" rectangular tubing with support gussets and continuous welds for strength.
Fenders Extra heavy duty 1/4" diamond plate fenders with safety light guards.
Lights License plate, stop, directional and safety. D.O.T. approved.
Axle 6,000;b Torflex Axle, features an independent suspension, cushioned with rubber, providing a smooth, quiet ride with no transfer of road shock from one wheel to the other.
Tires Two (2) ST225/75R15, 8ply, 28.10"dia.  Max load 2540 lbs. each.  High speed, highway rib mounted on a 6 bolt white spoked wheel.
Infeed Opening 10" x 18" opening at the infeed roll.
Infeed Chute Extra wide profile, 1/4" thick steel plate sides, 57" x 33".  Control bar positioned at top and side of infeed tray to control movement of material (forward, neutral and reverse).
Chipper Disc 2" thick x 32" diameter disc, machined and balanced, mounted on a 4 1/2" diameter steel hub with 6 exhaust blades.  (Approximately 600 lbs.)
Chipper Bearings 3"- 4 bolt flange bearing.  Self centering, heavy duty cast iron type.
Chipper Blades Four (4) 7 1/4" x 4" x 1/2", double sided, reversible, bolted, and set into 2 knife pockets.
Bed Knives Two (2) 1-Horizontal, 1" thick x 7" x 18" and 1 - Vertical, 1" thick x 8 3/8" x 9".  Both knives are reversible and adjustable.
Hydraulic Tank 10-1/4" x 10-1/4" x 8-1/4".
Hydraulic Feed System Heavy duty 1200 lb., weighted box type feed system.  Feed rate, 0 - 125' per minute.  Hydraulic hoses - 2,500 lbs., P.S.I. working, 10,000 lbs. P.S.I. burst, including hydraulic pump, control valve with relief valve, hydraulic motor and 16 3/4 gal. hydraulic oil reservoir. Hydraulic drive to feed roll is done through #80 chain and sprockets for increased torque and longer hydraulic motor life.
Hydraulic Feed Roll Large 21" diameter x 18" long, 600 lb., weighted feed roll with 14 rows of 1-1/4" long, replaceable knives, and scraper bars to prevent wrapping.  
P.T.O. Shaft Heavy duty with safety cover.
Discharge 360º swivel chute with adjustable chip deflector.  No tools required for adjustment.  (270º stop available, if required)
Paint Orange, polyester powder coated paint offers excellent weatherability and protection against ultra violet discoloration.
Overall Dimensions Total length - 11', Total Width - 5' 5", Height to top of discharge - 7' 7".