Rayco RC 6D Wood Chipper


Rayco RC6D ChipperPowered by a 25 HP Kohler V-twin engine with a capacity for 39.5 ft/lbs @ 2,800 rpm, the RC 6D Brush Chipper generates high performance, while providing long-life and easy maintenance. The entire Rayco line of brush chippers is manufactured in the USA at Rayco's state-of-the-art facilities. Rayco supplies our authorized Rayco dealers with quality components to guarantee that service and replacement parts are readily available.

The RC 6D Brush Chipper is ideal for rental applications due to its enhanced safety features and economical performance. In addition, its overall simplicity leads to reduced maintenance costs. Keeping the chipper at the correct rpm level creates a more uniform chip, uses less fuel, and minimizes vibration, which reduces wood-shifting and enhances operator safety.

Special Features:
• Variable Speed Feed Control
• High Capacity, Dual Element Air Cleaner
• Weighted Feed Roller
• Feed System Brake
• 360° Rotating Discharge Chute
• Telescoping Tongue
• Folding In-feed Table


RC 6D  
General Specifications: Standard 
Length 102"
Height 94"
Width at 25 HP 52.5"
Weight at 25 HP 1,960 lbs

Engine Options: Standard 
Make/Model Kohler CH730
Type of fuel Gasoline
HP 25
Peak torque (lb-ft) 39.5 @ 2,800
Number of cylinders V-twin
Cooling Air

Capacities: Standard 
Fuel Tank 7.6 gallon
Hydraulic tank 7.6 gallon

Cutting System: Standard 
Cutter 24" disc x 1.25" thick
Speed 1,722 rpm
Knives 0.625" x 4.5" x 8" lg., double-edged
Quantity of Knives 2
Bedknife (4) Edge, 3/4" x 5" x 6.6", A8
Clutch engagement Belt idler

Feed/Discharge System: Standard 
Chipping capacity 6" diameter
In-feed opening 6" x 6"
In-feed floor/table
64" (to knife) 59" (to feed wheel)
Feed table height 30"
Feed roller style (1) horizontal roll (8" diameter)
Downpressure Springs
Intake rate 0-180 ft /minute
Discharge height 94"
Rotation 360°

Chasis: Standard 
Frame 7-gauge plate
Tires 18.5 x 8 5/8"
Axle/Suspension 2200# Torsion axle
Hitch 2" ball
Jack options:  
#1-Standard 500# w/caster

Electical: Standard 
System Voltage 12V
Lights Stop, tail, turn, license, side marker