Bandit - 95 Brush Bandit Wood Chipper

Model 95  (9" Disc Style) Brush Bandit

Bandit 95 Chipper

The Model 95 is designed for materials that are more difficult to chip such as vines and stringy materials like palm waste.

The heart of this unit is a right angle feed system with a single powerful feed wheel. There is very little distance between the feed wheel and the chipper knife. Therefore, materials like vines and palm fronds that normally tend to wrap do not have an opportunity to do so.

This unit is especially popular in coastal areas where foliage, stringy materials and vines are prevalent.


Width 6'
Height 8' 2"
Length 13' 7" w/ infeed tray closed
Weight 3,800-4,600 pounds (depending on options)
Tires and Axles
Capacity 7000 lbs.
Tire Suspension Torflex
Tires 245/75R-16 Load range E, 10-ply
Noise Level 80 decibels at 50', 360 degrees
Tongue Jack
Capacity 2000 lbs.
Type Stationary foot pad
Safety Chains 5/16" links X 36" min (2) with hooks
Steel Fuel Tank Capacity 24.5 gallons
Steel Hydraulic Tank Capacity 7 gallons
Towing Hitch 2-1/2" pintle ring of 2 5/16" ball hitch adjustable height
Hydraulic Feed System
PSI 2000
Feed Wheel Diameter (1) 10-5/8" diameter X 16" long
Drive Motor 32.7 cu in
Feed Rate 90 feet per minute
Hinged Yoke Assembly pivoting
2 - Knife 6.2 GPM
3 - Knife 6.0 GPM
Chipper Cutting Wheel
Disc 34" diameter X 1" thick with 1" thick backer bar
Chipper Shaft 4" diameter at hub
Infeed Hopper Opening
Height 29"
Width 45"
Control Bar Forward/Neutral/Reverse
Chipper Capacity
Diameter 9" diameter round wood
Frame 2" X 4" rectangular metal tubing with support gussets
Discharge System
Swivel 360 degree manual rotation, w/ chip deflector
Tool/Battery Box Lockable aluminum battery box
Lighting Electrical System 12 volt system with rubber mounted LED taillights, w/ 6 prong replaceable coiled trailer power cord


  • Telescoping adjustable tongue
  • Spare tire and wheel
  • Hydraulic winch
  • Swivel castor wheel - 1000 lb. capacity
  • Spark arrestor muffler
  • Rear jack stand
  • Automatic feed system speed governor
  • Remote control for winch
  • Lockable fuel and hydraulic tank
  • Special paint colors
  • Brass sight gauges (steel tanks only) electric or non-electric
  • Knife Saver knife sharpener
  • Hand crank swivel discharge
  • Height adjustable discharge (hand crank)
  • Hydraulic swivel discharge
  • Tachometer/hour meter
  • Heavy duty tail light package
  • Hydraulic lift cylinder
  • Combination English/Spanish decals
  • Hydraulic tongue jack
  • Shut off switch for engine shutdown
  • Aluminum fenders
  • Aluminum fenders
  • Cone holder
  • Vice with mount attached
  • Fire extinguisher and mount
  • Engine top cover for air-cooled engines
  • 45 inch wide infeed tray (in lieu of standard)
  • 303CR rubber track undercarriage, w/ radio remote
  • 3 knife disc (in lieu of standard 2 knife)


Urethane Bandit Yellow
Urethane Black
Urethane Green
Urethane Alert Orange
Urethane Caterpillar Yellow
Urethane White 


Manufacturer Model HP Type
Cummins B3.3-A 65 Diesel
Cummins BT3.3-A 85 Diesel
John Deere 4045DF-150-A 80 Diesel
Caterpillar 3054B-A 86 Diesel
Deutz F4M2011F 66 Diesel
Deutz BF4M2011F 88 Diesel
Perkins 1104C-44 86 Diesel
Wisconsin VG4D 37 Gasoline
Kubota v2203-3 49 Diesel
Lombardini CHD2004T 57 Diesel
Perkins 104-22 w/o clutch 51.3 Diesel
Perkins 104-22 w/ clutch 51.3 Diesel
John Deere 5030 T 84 Diesel
Deutz F3L2011 w/clutch 46.2 Diesel
Caterpillar 3024C w/o clutch 51.3 Diesel
John Deere 5030T 75 Diesel
Caterpillar 3024C w/ clutch 51.3 Diesel
Kubota V3300 73 Diesel
Kubota V3300-DI-T 90 Diesel
Deutz F3L2011 w/o clutch 46.2 Diesel