Bandit - 200+ Brush Bandit Wood Chipper

Model 200+  (12" Disc Style) Brush Bandit

Bandit 200+ Brush Chipper

The Model 200+ is our second 12 inch disc style chipper available. This unit is a real work horse, that will keep two people busy feeding it.  

This intermediate sized model 200+ is a step up from the model 150 due to a wider infeed tray that is 45 inches wide compared to the 150's 35 inch standard tray.  The 200+ also has a faster feed rate than the model 150 which will allow it to process more material at a faster rate.  This unit will work great for those tree services, govermental agencies, and rental stores that are looking for a unit that will chip multiple stems at one time without the cost of a bigger model like the 250.


Width 6'
Height 8' 4"
Length 14' 6" w/ infeed tray closed
Weight 5,500-6,300 pounds (depending on options)
Tires and Axles
Capacity 7000 lbs.
Tire Suspension Torflex
Brakes Electric w/ brakeaway actuator
Tires 245/75R16 10-ply load range E
Noise Level 80 decibels at 50 ft. 360 degrees
Tongue Jack
Capacity 5,000 lbs.
Type Stationary footpad
Safety Chains 5/16" links X 36" min. (2) with hooks
Steel Fuel Tank Capacity 29 gallons
Steel Hydraulic Tank Capacity 13 gallons
Towing Hitch
Pintle 2-1/2" lunet ring
Ball 2" or 2-5/16"
Hydraulic Feed System
PSI 2500
Feed Wheel Diameter 7.5"
Feed Wheel Length 16 3/8"
Drive Motor 14 cu./in.
Hinged Yoke Assembly slide box
2 - Knife 8.0 GPM
3 - Knife 8.0 GPM
Chipper Cutting Wheel
Disc 40" diameter X 2" thick
Knife Pockets 2 pockets - 2 knives per pocket
Chipper Shaft 4" diameter
Feed Rate 120 fpm
Infeed Hopper Opening
Height 29"
Width 45"
Control Bar Forward/Neutral/Reverse
Chipper Capacity
Diameter 12"
Frame 2" X 6" rectangular metal tubing with support gussets
Discharge System
Swivel 360 degree manual rotation w/ adjustable chip deflector
Tool/Battery Box Aluminum tool and battery box
Lighting Electrical System 12 volt system with rubber mounted LED taillights, 6 prong replaceable coiled trailer power cord


  • Telescoping adjustable tongue
  • Spare tire and wheel
  • Quad wheel feed system
  • Articulating tongue for curbside feed
  • Hydraulic winch
  • Swivel castor wheel - 1000 lb. capacity
  • Rear jack stand
  • Automatic feed system speed governor
  • Remote control for winch
  • Lockable fuel and hydraulic tank
  • Special paint colors
  • Brass sight gauges (steel tanks only) electric or non-electric
  • Hand crank swivel discharge
  • Height adjustable discharge (hand crank)
  • Hydraulic controlled chip deflector
  • Hydraulic swivel discharge
  • Tachometer/hour meter
  • Heavy duty tail light package
  • Hydraulic lift cylinder
  • Combination English/Spanish decals
  • Hydraulic tongue jack
  • Shut off switch for engine shutdown
  • Cone holder
  • Vice with mount attached
  • Fire extinguisher and mount
  • Caterpillar 305CR rubber track undercarriage, w/ radio remote
  • Hydraulic flow control
  • 64 inch wide infeed tray (in lieu of standard)
  • Wheel chocks (steel or aluminum)
  • Model 250 hydraulic system


Urethane Bandit Yellow
Urethane Black
Urethane Green
Urethane Alert Orange
Urethane Caterpillar Yellow
Urethane White 


Manufacturer Model
Cummins B3.3-A 65 Diesel
Cummins BT3.3-A 85 Diesel
Cummins B3.9 TAAP 110 Diesel
John Deere 4045DF-150-A 80 Diesel
John Deere 4045TF-150-A 100 Diesel
John Deere 4045TF-150E-A 115 Diesel
John Deere 4045TF-150G-A 125 Diesel
Cummins B3.9TAAP 125 Diesel
Caterpillar 3054B-A 86 Diesel
Caterpillar 3054ET 115 Diesel
Perkins 1104C-E44T 115 Diesel
Deutz F4M2011F 66 Diesel
Deutz BF4M2011F 88 Diesel
Perkins 1104C-44 86 Diesel
Perkins 1104C-E44TA 140 Diesel
John Deere 4045 140 Diesel
John Deere 5030 T 84 Diesel
Caterpillar 3054CATAAC 130 Diesel
Caterpillar 3054EATAAC 140 Diesel
John Deere 5030T 75 Diesel
Perkins 1101C-44TA 130 Diesel
Kubota V3300 73 Diesel
Kubota V3300-DI-T 90 Diesel
Cummins B-130 130 Diesel