Bandit - 150 Brush Bandit Wood Chipper

Model 150  (12" Disc Style) Brush Bandit

Bandit 150 Brush Chipper

The Model 150 is the smallest of the three 12 inch disc chippers available from Bandit.  This unit is an industry standard and is economical and compact.

Rugged construction, a powerful feed system, and a large 29 X 35 infeed opening are keys to this chipper's ability to process trees and brush with limited trimming.  The model 150 is a chipper for those tree services, rental companies, and individuals wanting to chip brush, limbs, and some smaller trees. Do not let the size of the 150 fool you, this unit does have the capabilty and power to chip a 12 inch diameter tree.  So if you are looking for a compact disc chipper that will give many years of dependable service, than give the model 150 a look. 


Width 6'
Height 8' 4"
Length 14' 6" w/ infeed tray closed
Weight 5,500 - 6,300 pounds (depending on options)
Tires and Axles
Capacity 7000 lbs.
Tire Suspension Torflex
Brakes Electric w/ brakeaway actuator
Tires 245/75R16 10 ply load range E
Noise Level 80 decibels at 50 ft. 360 degrees
Tongue Jack
Capacity 5,000 lbs.
Type Stationary footpad
Safety Chains 5/16" links X 36" min. (2) with hooks
Steel Fuel Tank Capacity 29 gallons
Steel Hydraulic Tank Capacity 13 gallons
Towing Hitch
Pintle 2-1/2" lunet ring
Ball 2" or 2-5/16"
Hydraulic Feed System
PSI 2500
Feed Wheel Diameter 7.5"
Feed Wheel Length 16 3/8"
Drive Motor 14 cu./in.
Hinged Yoke Assembly Slide box
2 - Knife 6.0 GPM
3 - Knife 8.0 GPM
Chipper Cutting Wheel
Disc 40" diameter X 2" thick
Knife Pockets 2 pockets - 2 knives per pocket
Chipper Shaft 4" diameter
Feed Rate 90 fpm
Infeed Hopper Opening
Height 29"
Width 35"
Control Bar Forward/Neutral/Reverse
Chipper Capacity
Diameter 12"
Frame 2" X 4" rectangular metal tubing with support gussets
Discharge System
Swivel 360 degree manual rotation, w/ adjustable chip deflector
Tool/Battery Box Aluminum battery box
Lighting Electrical System 12 volt system with rubber mounted LED taillights, w/ 6 prong replaceable coiled trailer power cord


  • Telescoping adjustable tongue
  • Spare tire and wheel
  • Quad wheel feed system
  • Articulating tongue for curbside feed
  • Hydraulic winch
  • Swivel castor wheel - 1000 lb. capacity
  • Rear jack stand
  • Automatic feed system speed governor
  • Remote control for winch
  • Lockable fuel and hydraulic tank
  • Special paint colors
  • Brass sight gauges (steel tanks only) electric or non-electric
  • Knife Saver knife sharpener
  • Hand crank swivel discharge
  • Height adjustable discharge (hand crank)
  • Hydraulic controlled chip deflector
  • Hydraulic swivel discharge
  • Tachometer/hour meter
  • Heavy duty tail light package
  • Hydraulic lift cylinder
  • Combination English/Spanish decals
  • Hydraulic tongue jack
  • Shut off switch for engine shutdown
  • Cone holder
  • Vice with mount attached
  • Fire extinguisher and mount
  • Caterpillar 305CR rubber track undercarriage, w/ radio
  • remote
  • 64 inch wide infeed tray (in lieu of standard)
  • Wheel chocks (steel or aluminum)
  • 45 inch wide infeed tray (in lieu of standard)


Urethane Bandit Yellow
Urethane Black
Urethane Green
Urethane Alert Orange
Urethane Caterpillar Yellow
Urethane White 


Manufacturer Model
Cummins B3.3-A 65 Diesel
Cummins BT3.3-A 85 Diesel
Cummins B3.9 TAAP 110 Diesel
John Deere 4045DF-150-A 80 Diesel
John Deere 4045TF-150-A 100 Diesel
John Deere 4045TF-150E-A 115 Diesel
John Deere 4045TF-150G-A 125 Diesel
Cummins B3.9TAAP 125 Diesel
Caterpillar 3054B-A 86 Diesel
Caterpillar 3054ET 115 Diesel
Perkins 1104C-E44T 115 Diesel
Deutz F4M2011F 66 Diesel
Deutz BF4M2011F 88 Diesel
Perkins 1104C-44 86 Diesel
Perkins 1104C-E44TA 140 Diesel
John Deere 4045 140 Diesel
John Deere 5030 T 84 Diesel
Caterpillar 3054CATAAC 130 Diesel
Caterpillar 3054EATAAC 140 Diesel
John Deere 5030T 75 Diesel
Perkins 1101C-44TA 130 Diesel
Kubota V3300 73 Diesel
Kubota V3300-DI-T 90 Diesel
Cummins B-130 130 Diesel